Wasp WPL 406 Manual do Utilizador descarregar pdf (Página 63)

WPL 406 User Manual

Self Test …

Printing …

1/1

Printing …

1/1

Dump Mode

UP: Fwd.

DOWN: Rev.

MENU: Exit

3.3.1 Print Config.

This feature is used to print current printer configuration to the label. On the

configuration printout, there is a print head test pattern, which is useful for

checking if there is any dot damage on the print head heater element.

(Please refer to section 4.2.)

Diagnostics 1/4

Print Config.

Dump Mode

Rotate Cutter

3.3.2 Dump Mode

Captures the data from the communications port and prints out the data received

by printer. In the dump mode, all characters will be printed in 2 columns as

following. The left side characters are received from your system and right side

data are the corresponding hexadecimal value of the characters. It allows users or

engineers to verify and debug the

program. (Please refer to section 4.2)

Diagnostics 2/4

Pritn Config.

Dump Mode

Rotate cutter

Note:

1. Dump mode requires 4” wide paper width.

2. Turn off / on the power to resume printer for normal printing.

3. Press FEED button to back to the previous menu.

3.3.3 Rotate Cutter

In case paper is jammed in the cutter, this feature can rotate the cutter blade forward or

reverse direction, which is helpful to remove the jammed paper easily from the cutter.

Diagnostics 3/4

Print Config.

Dump Mode

Rotate Cutter

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 82 83

Sem comentários

Wasp WPL 406 Manual do Utilizador Página 63