Wasp WPA1200 II Manual do Utilizador descarregar pdf (Página 5)

WPA 1200 II Users’ Guide

iii

Laser Information

The WPA1200 II series is certified in the U.S. to conform to the requirements of DHHS/CDRH

21CFR Subchapter J and to the requirements of IEC 825-1. Class II and Class 2 products are

not considered to be hazardous. The WPA1200 II series contains internally a Visible Laser

Diode (VLD) whose emissions do not exceed the maximum limits as set forth in the above

regulations. The scanner is designed so that there is no human access to harmful laser light

during normal operation, user maintenance or during prescribed service operations.

The laser safety warning label required by the DHHS/IEC for the WPA1200 II series' optional

laser scanner module is located on the memory compartment cover, on the back of the unit.

CAUTION! Use of controls or adjustments or performance of procedures other than those

specified herein may result in hazardous laser light. Use of optical instruments

with the scanner will increase eye hazard. Optical instruments include binoculars,

microscopes, and magnifying glasses. This does not include eyeglasses worn by

the user.

Battery Notices

The WPA1200 II is equipped with a Lithium-Ion battery pack and backup battery. Both

batteries will discharge after an extended period of not being used.

When both batteries are discharged, recharge the unit for 16 hours in order to fully charge the

main battery and backup battery. Recharge the WPA1200 II through the following:

1. Plug the USB charging cable to the WPA1200 II and plug the 5V/2A AC-DC adapter to

the power jack of the USB charging cable.

2. Place the WPA1200 II into the docking station and plug the 5V/2A AC-DC adapter to

the power jack of the docking station.

1 2 3 4 5 6 7 8 9 10 ... 50 51

Sem comentários

Wasp WPA1200 II Manual do Utilizador Página 5